GATE ME 2025 Set 1 — Question 25
Go beyond PYQs with Success TrackerAI-powered personalised practice and doubt support. Unlimited practice on eligible plans; AI usage limits apply.MCQ+1 / -0.33EasyLimits, Fits & TolerancesMetrology & InspectionMetrology, CIM & Additive Mfg
Metrology, CIM & Additive Mfg → Metrology & Inspection → Limits, Fits & Tolerances
Last updated
Question
When assembled, the hole mm and shaft mm will result in
Correct answer
(C) transition fit
Solution
Hole limits: mm.
Shaft limits: mm.Maximum Shaft Size ( mm) Minimum Hole Size ( mm) Interference is possible.
Minimum Shaft Size ( mm) Minimum Hole Size ( mm) Clearance is possible.Since both interference and clearance are possible depending on the actual sizes within the tolerance zones, it is a transition fit.
Shaft limits: mm.Maximum Shaft Size ( mm) Minimum Hole Size ( mm) Interference is possible.
Minimum Shaft Size ( mm) Minimum Hole Size ( mm) Clearance is possible.Since both interference and clearance are possible depending on the actual sizes within the tolerance zones, it is a transition fit.
Continue learning with Success Tracker
A step still unclear? Work through it with support
Use Success Tracker to ask about the reasoning, then try another GATE ME question to check your understanding.
AI-powered practice· Unlimited practice on eligible plans
- PYQs with solutions
- Attempt available previous-year questions, then compare your reasoning with the worked solution. Coverage varies by stream.
- Practice that adapts
- Choose a topic, work on weaker areas and bookmark questions to revisit. Your attempts feed your progress tracking.
- AI doubt support
- Ask follow-up questions about a step or concept while practising, instead of stopping at the final answer.
Unlimited practice is available on eligible plans. Free practice and AI usage have limits; check the current plan allowances before choosing.
This page stays readable without an account. AI responses can be wrong; check them against the solution and source material.
More questions on Metrology & Inspection
2026 Set 1 Q31Which one of the following options is NOT an error associated with STereoLithography (STL) file…2026 Set 1 Q33A two-dimensional surface profile is obtained over a sampling length by using a contact type stylus…2026 Set 1 Q45Consider the Euler variables of polyhedral objects namely, , , , and as given in…2025 Set 1 Q23In computer aided design (CAD), solid models can be constructed using2025 Set 1 Q40In relation to additive manufacturing, match the following | Process | Layer creation technique |…