GATE ME 2015 Set 1 — Question 32
Go beyond PYQs with Success TrackerAI-powered personalised practice and doubt support. Unlimited practice on eligible plans; AI usage limits apply.MCQ+1 / -0.33EasyLimits, Fits & TolerancesMetrology & InspectionMetrology, CIM & Additive Mfg
Metrology, CIM & Additive Mfg → Metrology & Inspection → Limits, Fits & Tolerances
Last updated
Question
Holes of diameter mm are assembled interchangeably with the pins of diameter mm. The minimum clearance in the assembly will be
Correct answer
(B) 0.015 mm
Solution
To find the minimum clearance, we subtract the maximum pin diameter from the minimum hole diameter.
Minimum Clearance =
Minimum Clearance = mm.Thus, the correct option is (B).
1.Hole dimensions:
- Lower limit () = mm
- Upper limit () = mm
- Lower limit () = mm
- Upper limit () = mm
Minimum Clearance =
Minimum Clearance = mm.Thus, the correct option is (B).
Continue learning with Success Tracker
A step still unclear? Work through it with support
Use Success Tracker to ask about the reasoning, then try another GATE ME question to check your understanding.
AI-powered practice· Unlimited practice on eligible plans
- PYQs with solutions
- Attempt available previous-year questions, then compare your reasoning with the worked solution. Coverage varies by stream.
- Practice that adapts
- Choose a topic, work on weaker areas and bookmark questions to revisit. Your attempts feed your progress tracking.
- AI doubt support
- Ask follow-up questions about a step or concept while practising, instead of stopping at the final answer.
Unlimited practice is available on eligible plans. Free practice and AI usage have limits; check the current plan allowances before choosing.
This page stays readable without an account. AI responses can be wrong; check them against the solution and source material.
More questions on Metrology & Inspection
2026 Set 1 Q31Which one of the following options is NOT an error associated with STereoLithography (STL) file…2026 Set 1 Q33A two-dimensional surface profile is obtained over a sampling length by using a contact type stylus…2026 Set 1 Q45Consider the Euler variables of polyhedral objects namely, , , , and as given in…2025 Set 1 Q23In computer aided design (CAD), solid models can be constructed using2025 Set 1 Q25When assembled, the hole mm and shaft mm will result…